Residential customers
What we Offer
At Renaud Refinishing, our personal and professional team will help you transform your dated bathroom, kitchen, or home exterior into something fresh and beautiful. With our speciality repairing, refinishing and refreshing your existing bathtubs, showers, sinks, tile, cabinets, countertops, and brick or siding, we aim to save our customers time and money. However, we also offer full demo and renovation services if refinishing is not possible or our customers prefer a new install.
Browse our services:
Free Consultation
Contact us to schedule a free consultation. We'll go to your home and give an inspection of the area requiring updating. After discussing your likes and needs, we'll provide an honest and professional plan to provide the results you'd like to see. Also, we'll provide a quote for the job. If you accept the quoted offer, we require a 50% deposit and will schedule a date with you to do the work. The remaining 50% is due after the work is complete.
Bathrooms: What to Expect
Before we arrive, ensure the area where the job is to be done is cleared of anything on countertops, floors, and walls. We usually use spray equipment and clean areas make covering those surfaces easier. We use only safe and low VOC products, but if anyone has breathing issues, it would be best to have them spend the day elsewhere.
We'll arrive at your home at the agreed date and time. Typically, bathtub refinishing takes about one day from start to finish. Sometimes, the caulking needs to be done the next day.
Firstly, we'll thoroughly clean and prepare the bath tub and tiles or tub surround (if doing those as well).
Secondly, we repair any chips, cracks or other flaws. For tile work, we repair any grout that is missing or broken, and replace or repair tiles. Cracks or chips in tubs are also filled and sanded flat.
Thirdly, all surfaces around the area to be sprayed are covered to protect those areas. Occasionally, the masking tape may peel some paint though we do our best to avoid this happening. The room is also ventilated with safety exhaust systems to suck the fumes out of your home.
Fourthly, the bathtub, tile/surround or other surface is sprayed (typically 5 coats for glaze).
Fifthly, any removed faucets or fixtures are replaced and caulking is completed - though this step may roll into the next day depending on drying times.
Finally, the room is cleaned up! Any fans should remain on and the door closed to prevent unwanted smells in the house. Once dry the smell dissipates quickly.
In most cases, the sprayed surface, such as a bathtub, is ready to use again after 24 hours of drying time. However, be careful with putting heavy items or scraping the surface for one week as the product is still curing.
You may feel some bumps or see a few marks, but these usually go away after a few cleanings and can be buffed out by us in our follow-up visit.
NEVER USE BLEACH CLEANERS, COMIT, or ABRASIVES. Use only non-bleach bathroom cleaners with a cloth, sponge or paper towels.
Kitchens: What to Expect
Before we arrive, ensure the area where the job is to be done is cleared of anything on countertops, floors, and walls. We usually use spray equipment and clean areas make covering those surfaces easier. We use only safe and low VOC products, but if anyone has breathing issues, it would be best to have them spend the day elsewhere.
We'll arrive at your home at the agreed date and time. Typically, we try to complete the job within two days but it may run longer depending on the scope of the work to be done.
The area to be sprayed will be covered and protected. Though we try to avoid it, the masking tape may peel off older paint on the walls in spots when we later remove it.
For cabinet refinishing, doors are removed, cleaned and degreased, lightly sanded, and then sprayed with a cabinet stain or paint.
For countertop refinishing, it is first cleaned, degreased and prepped. Repair work may need to happen before the area is sprayed with a durable product application.
Once completed, the area should be kept ventilated until the area sprayed is dry to touch. Doors are then put back on and should be left open to finish drying for at least 24 hours. Countertops should not have anything put on them for at least 24 hours and heavy items should wait for one week. NEVER USE BLEACH CLEANERS, COMIT, or ABRASIVES. Use only non-bleach kitchen cleaners with a cloth, sponge or paper towels.
Home Exteriors: What to Expect
Before we arrive, ensure the area around your home is clear of debris and other items.
We'll arrive at your home at the agreed date and time. Typically, we try to complete the job within two days but it may run longer depending on the scope of the work to be done.
First, we'll spray your exterior with a pressure washer to clean the brick or siding. Then, we'll cover and protect areas not to be refinished.
For brick staining, we use only top-quality products that allow your brick to breath while providing a durable finish. Our stains soak into the surface, crystallize within it, and become a permanent part of the wall. Unlike paints, our products have a life expectancy of 20 to 30 years or more, with no maintenance. It is also breathable, non-hazardous, odourless, water repellant, UV resistant, and mold and algae resistant.
For siding and trimming, we again use only top-quality, specialized paint made exclusively for PVC (vinyl), cellular PVC, aluminum, and fiberglass. It provides great longevity with superior adhesion, durability, UV and weather protection, while being environmentally friendly.
Both products may be sprayed or rolled on with professional application techniques.
After the Job
We do follow-up visits or communications for all of our jobs. Your customer satisfaction is our number one priority. Contact us to schedule a free consultation.